The latest news on electronic components for the lighting industry.
Provided by Anglia.
|
 Click here for Lighting News RSS feed |
 |
|
Cree has announced a breakthrough new lighting-class LED that can obsolete energy-inefficient light bulbs. The XLamp® MPL EasyWhite™ LED offers the performance, colour consistency and lumen density to displace conventional light sources. |
20 August 2010 |
|
|
|
|
 |
|
With dimensions of 5 mm by 4 mm by 1.85 mm thick, Avago’s compact 3W ASMT-Jx33 is packaged in a 6-leaded small outline package (SOP) and capable of being driven to up to 700 mA to provide high flux output performance. |
19 August 2010 |
|
|
|
|
 |
|
Cree has expanded its XLamp® XP-C family by introducing LEDs in royal blue, blue, green, amber, red-orange and red that are 10-to-50 percent brighter than Cree’s previous midrange colour LEDs. |
13 August 2010 |
|
|
|
|
 |
|
The JOLLY SLIM LED driver has been designed to be installed in luminaires and thanks to his slim dimensions, the same as electronic ballasts for T5 fluorescent lamps, being easily placed in most of the existing luminaires. |
30 July 2010 |
|
|
|
|
 |
|
These new XP-G LEDs extend Cree’s highest level of light output and efficacy across the white colour spectrum, driving general lighting applications such as LED replacement lamps, outdoor area and commercial luminaires. |
16 July 2010 |
|
|
|
|
 |
|
ECOdrives are highly integrated, cost-effective, enclosed and easy-to-configure constant current driver/controllers for high-brightness, indoor LED lighting applications. |
15 July 2010 |
|
|
|
|
 |
|
EPCOS has developed a new series of PTC thermistors in the EIA 0603 case size specifically for LED driver circuits. |
08 July 2010 |
|
|
|
|
 |
|
The AP8802 is a step-down DC/DC converter designed to drive LED with a constant current. Its 60V maximum input voltage allows up to fifteen LEDs in series to be driven. |
01 April 2010 |
|
|
|
|
 |
|
The DLD101 is a 1A rated linear mode constant current driver specifically designed for driving LEDs for illumination and indication applications.
It has been configured using optimised discretes in a thermally efficient DFN package. |
27 May 2010 |
|
|
|
|
 |
|
The ZXLD1370 is a high accuracy LED driver controller; the LED load current that can be delivered is dependent on the external MOSFET.
It can be used as a Buck converter, Boost converter or Buck-Boost converter. |
25 May 2010 |
|
|
|
|
 |
