 |
MurataPS MEV1 series expands with the introduction of 15V, 24V and 48V input versions
05 March 2010 |
| Murata Power Solutions has introduced 3 new input voltages to the MEV1 series in addition to the 5V and 12V input versions released in November 2008. |
|
|
|
|
 |
Sixteenth-brick DC/DC converter from MurataPS combines high power and efficiency for space-constrained designs
28 February 2010 |
| The ULS is a new range of isolated DC/DC converters that provide up to 66 Watts of output power and full 2250VDC isolation from a 'sixteenth-brick' package. |
|
|
|
|
 |
1W single output DC/DC converter series from MurataPS combines excellent regulation and efficiency performance in an industry-standard package
04 October 2009 |
| Murata Power Solutions has introduced the MER1 series of high performance isolated 1W single output DC/DC converters that offer high efficiency levels and full-load performance across the industrial temperature range. |
|
|
|
|
 |
Four function AC power meters from MurataPS display Volts, Amps, Watts and Power Factor
05 July 2009 |
| Murata Power Solutions’ ACM20 series AC power meters display the most critical measurements in mains-powered equipment: voltage, amperage, active power (watts) and power factor. |
|
|
|
|
 |
Miniature 3A SIP added to the MurataPS Okami family of DC/DCs
05 July 2009 |
| Measuring only 10.4 x 16.5 x 10.2 mm, the OKR-T/3 is an adjustable-output 3A SIP and the latest addition to the Okami family of PoL DC/DC converters. |
|
|
|
|
 |
12V input SMT modules added to the MurataPS OKAMI family
19 June 2009 |
| Murata Power Solutions have added eight new 12V input models to their DOSA compliant Okami™ range of non-isolated point-of-load (PoL) DC/DC converters, with output currents of 10A and 16A. |
|
|
|
|
 |
Okami - The new breed of DC/DCs from Murata PS - Phase II : 10 & 16 Amp SIPs
15 April 2009 |
| Murata Power Solutions have announced the launch of the the second phase of their new Okami™ range of miniature non-isolated single output point-of-load (PoL) DC/DC converters. |
|
|
|
|
 |
Okami - The new breed of DC/DCs from Murata Power Solutions
20 March 2009 |
| Murata PS have introduced the first three models in their new Okami™ range of miniature non-isolated single output point-of-load (PoL) DC/DC converters, which deliver output currents of 3A and 5A. |
|
|
|
|
 |
Isolated, high efficiency DC/DC converter series from Murata Power Solutions gives ultra-high performance in a small package
17 February 2009 |
| Murata Power Solutions has added a new series of cost-effective eighth-brick DC/DC Converters to its existing range of brick converter products. |
|
|
|
|
 |
Wide input DC/DC converters from Murata Power Solutions deliver 15W from one square inch industry standard package
18 December 2008 |
| Murata Power Solutions has expanded its offering of isolated, wide input range DC/DC Converters with the introduction of its UEI15 series. |
|
|
|
|
