The ALED1642GW is an AEQC-100 qualified 16-channel LED driver for in-vehicle signage. Each of the current-regulated outputs can sink from 3 to 40 mA and is independently controlled through PWM dimming to provide a 16-bit grayscale palette. Thanks to its 20 V output ratings the device can drive several LEDs connected in a series. The on-chip auto power shut-down/wake-up capability minimizes power consumption while the programmable turn-on and turn-off time helps designers to meet stringent EMC constraints. The device comes in a thermally-enhanced 4.4X7.8 mm TSSOP24 package.
The ALED1642GW guarantees 20 V output driving capability allowing the user to connect several LEDs in series. In the output stage, sixteen regulated current sources provide from 3 mA to 40 mA constant current to drive the LEDs. The current is programmed through an external resistor and can be adjusted by 7-bit current gain register in two subranges.The brightness can be adjusted separately for each channel through a 12/16-bit grayscale control. A programmable turn-on and turn-off time (four different values are available) improves the system low noise generation performances.
In the ALED1642GW is available the open/short error detection mode. The auto power shutdown and auto power-on feature (this feature is selectable) allow the device to save power without any external intervention. Thermal management is equipped with overtemperature data alert and the output thermal shutdown (170°C). The high clock frequency is up to 30 MHz and it makes the device suitable for high data rate transmission. A selectable gradual output delay reduces the inrush current whereas the selectable SDO synchronization feature works when the device is used in daisy chain configuration. The supply voltage range is between 3 V and 5.5V.
ST's LED array drivers fully integrate all functions required to drive high-brightness LEDs. These devices allow constant-current control in a single-chip solution. The external parts are reduced to only one resistor that sets the preferred maximum current for all outputs. Devices also come with additional features such as high current, high precision, local and global LED brightness adjustment, thermal shutdown, error detection and auto power-saving functionalities.
ST offers a selection of multichannel constant-current LED drivers manufactured and qualified to meet and exceed automotive industry requirements. These LED array drivers are 20 V rated for best fit with automotive ratings. They are available with either 8 or 16 independent channels and provide tight channel-to-channel and IC-to-IC output current matching, ranging from 3 to 100 mA. They embed automatic power saving, error detection and thermal shutdown features. The ALED1642 features independent PWM dimming for maximum flexibility.
KEY FEATURES & BENEFITS
KEY APPLICATIONS
Click here for more information and to buy from Anglia Live
STMicroelectronics have introduced the L6986I device, a high-performance synchronous buck converter that is designed for use in applications that require isolated power conversion.
STMicroelectronics has introduced a new performance-oriented microcontroller (MCU) series, the STM32H5 MCU has cutting-edge security provided by STM32Trust TEE Security Manager for smart, connected devices.
Wisbech, 27 November 2023. Anglia Components PLC today announced that it is bringing the Anglia Live eCommerce platform to Europe, following a major investment in its logistics infrastructure and website.
The LED1202 from STMicroelectronics is a programmable 12-channel low quiescent current LED driver. The device guarantees 5 V output driving capability and has 12 low-side current generators allowing each channel to provide up to 20 mA output current
Anglia Components has been named STMicroelectronics 'UK Distributor of the Year 2022' this marks the third year in a row Anglia has been presented with an award by ST.
The ST1PS01 / ST1PS02 / ST1PS03 devices from STMicroelectronics are a family of nano-quiescent miniaturized synchronous step-down converters. The devices are able to provide up to 400 mA output current with an input voltage ranging from 1.8 V to 5.5 V.