Supplier sections

ABL Aluminium Components

Abracon LLC

Advantech

American Technical Ceramics

Analog Devices

Antenova

Anysolar

Arcol

Arcolectric

Avalue

Bel components

Bergquist

Binder

Bivar

Bloomice

Bolb Inc

Bourns

Boyd

Bulgin

Bussmann

C&K

Calinar

Cambion

CamdenBoss

Carclo

CEL

Ceramate

Cliff Electronic Components

Conquer

Cornell Dubilier

Cosmic

Co-Tron

Cree

Cre-Sound

CTC

CTi

Deltron

Digi International

Diptronics

EAO

Eaton Bussmann/Coiltronics

ECE

Ecliptek

Efficient Power Conversion

Efore

Ekinglux

Elettronica Rossoni

EPCOS

EPOC

ESI

Eurohm

Everspin

Figaro

Fischer

Fox Electronics

Haimooo

Hammond Manufacturing

Harting

Harwin

Herald

Hirose

Hirschmann

Hittite

Honeywell

Hongfa

Hope RF

Hudson

Ilsi

Inalways

Invac

Ixys

JDI Europe

JNC

Kang yang

Keystone

Khatod

Kingtek

Kioxia Europe

KOA

KYOCERA AVX

Laird Technologies

LEDIL

Linear Technology

LITE-ON Optoelectronics

Littelfuse

Lumberg

Lumileds

Magnetix

Magnetone

Marl

Mascot

Mitsubishi

Mmd

M-Pro

Murata

MurataPS

Neutrik

Nichicon

Nover

Ohmite

OKO

Omron

Panasonic

PANJIT

Phoenix Contact

Pickering

Piher

Polymer Optics

Quay RF

Renata

RF360

ROHM

Roxburgh

Samsung

Schaffner

Schurter

Sensirion

Shindengen

SIMCom

Solomon Systech

Stanley Electric

STMicroelectronics

Studiomate

Taicom

Taiwan Semiconductor

Taiway

Taoglas

TDK

Telit Cinterion

Tianbo

Titan-Opto

Tokyo Parts

Toshiba

Varta

Vigortronix

Walsin

Warth

WIMA

Winbond

Murata High Drain & Extended Temperature Lithium Coin Cells Developed for IoT Devices, samples available from Anglia

Murata have extended their range of Lithium Coin cells to include High Drain and Extended Temperature types to meet the demanding requirements of next generation IoT devices.

Click Here

Rate this page

You can now follow us on Blogger, Facebook, LinkedIn, Twitter, WordPress, Live Journal or You Tube by clicking on the logos below.

Anglia delivers by

Recognised as the UK’s number one for reliability, flexibility and customer service.

Murata release PMBus 600W DOSA Compliant, Digital 1/4 Brick DC-DC Converter

Murata has introduced a series of 600W, DOSA compliant, 12V output, digital quarter-brick DC-DC converters from Murata Power Solutions. The series was designed for high reliability applications, the heart of the module is a 32-bit ARM processor that supports the latest PMBus commands for digital control and telemetry functions. The DSQ, DCQ and DAQ converters support the full ‘TNV’ input range of 36 – 75V, with a typical efficiency of 96% @ full load 48Vin.

The series is designed to support droop mode current sharing of multiple modules for increased power output with tight load sharing. I/O Isolation is 2250 VDC, with a functional insulation system and it carries the UL/CSA safety agency approvals. Options for these modules include a digital interface supporting the latest PMBus command set, parallel load sharing, positive or negative on/off logic, along with options for standard “analog” DOSA pinout and a 5pin Bus Converter pinout.

The DSQ model includes a PMBus interface that provides a means (I²C Bus) to configure output voltage, soft start parameters, input and output over-voltage protection limits, input under-voltage lockout, current limit and thermal shutdown. Telemetry functions include output voltage and current, input voltage and temperature, as well as indications for ‘power good’ and on/off status. The heart of the module is a 32-bit ARM processor controlling all functions and parameters.

The DSQ modules are designed, tested and qualified according to the industry standard IPC9592 for reliability requirements. Electrical performance is state-of-the-art starting with an efficiency rating of 96% with 600W output power @ 55°C with no heat sink, output Pre-Bias protection under all conditions, tight line & load regulation, low output ripple & noise and fast load transient response, all packaged into an industry standard DOSA quarter brick format.
All variants include a baseplate for optimal thermal performance that also provides a surface for mounting an additional heat sink for extreme temperature applications. Safety certifications include UL/EN/IEC 60950-1 and CAN/CSA-C22.2 No 60950-1 2nd edition and the parts are compliant with EN55022/CISPR22 EMC standards with minimal input filtering.

The DSQ series DC-DC converters are suitable for a number of applications including communications & networking equipment, computing equipment, wireless base stations, PoE systems, MicroTCA, fan trays and test equipment.

Key Features & Specifications

DOSA Compliant Digital quarter-brick with PMBus interface
36-75V Input voltage range
96% Typical efficiency
Delivers up to 50A (600W)
Low output ripple and noise
Wide operating temperature range -40°C to +85°C
Optional droop load sharing of two or more modules
Baseplate included for improved thermal performance
Output over current and over voltage protection
Over temperature protection
Negative and Positive logic (Negative logic standard configuration)
2250V DC I/O Isolation compliant with IEEE802.3 PoE Standards
Certified to UL/EN/IEC 60950-1, CAN/CSA-C22.2 No 60950-1 2nd edition, safety approval and EN55022/CISPR22 EMC standards

Click here for more information or to buy from Anglia Live.

Click here to download the DSQ datasheet

Anglia are offering customers FREE samples of the DSQ series PMBus 600W DOSA Compliant Digital 1/4 Brick DC-DC Converters from Murata, please fill in the form below to register for your FREE samples now.