Supplier sections

ABL Aluminium Components

Abracon LLC

Advantech

American Technical Ceramics

Analog Devices

Antenova

Anysolar

Arcol

Arcolectric

Avalue

Bel components

Bergquist

Binder

Bivar

Bloomice

Bolb Inc

Bourns

Boyd

Bulgin

Bussmann

C&K

Calinar

Cambion

CamdenBoss

Carclo

CEL

Ceramate

Cliff Electronic Components

Conquer

Cornell Dubilier

Cosmic

Co-Tron

Cree

Cre-Sound

CTC

CTi

Deltron

Digi International

Diptronics

EAO

Eaton Bussmann/Coiltronics

ECE

Ecliptek

Efficient Power Conversion

Efore

Ekinglux

Elettronica Rossoni

EPCOS

EPOC

ESI

Eurohm

Everspin

Figaro

Fischer

Fox Electronics

Haimooo

Hammond Manufacturing

Harting

Harwin

Herald

Hirose

Hirschmann

Hittite

Honeywell

Hongfa

Hope RF

Hudson

Ilsi

Inalways

Invac

Ixys

JDI Europe

JNC

Kang yang

Keystone

Khatod

Kingtek

Kioxia Europe

KOA

KYOCERA AVX

Laird Technologies

LEDIL

Linear Technology

LITE-ON Optoelectronics

Littelfuse

Lumberg

Lumileds

Magnetix

Magnetone

Marl

Mascot

Mitsubishi

Mmd

M-Pro

Murata

MurataPS

Neutrik

Nichicon

Nover

Ohmite

OKO

Omron

Panasonic

PANJIT

Phoenix Contact

Pickering

Piher

Polymer Optics

Quay RF

Renata

RF360

ROHM

Roxburgh

Samsung

Schaffner

Schurter

Sensirion

Shindengen

SIMCom

Solomon Systech

Stanley Electric

STMicroelectronics

Studiomate

Taicom

Taiwan Semiconductor

Taiway

Taoglas

TDK

Telit Cinterion

Tianbo

Titan-Opto

Tokyo Parts

Toshiba

Varta

Vigortronix

Walsin

Warth

WIMA

Winbond

STMicroelectronics introduce L6986I synchronous isolated buck converter samples and evaluation boards available from Anglia.

STMicroelectronics have introduced the L6986I device, a high-performance synchronous buck converter that is designed for use in applications that require isolated power conversion.

Click Here

Rate this page

You can now follow us on Blogger, Facebook, LinkedIn, Twitter, WordPress, Live Journal or You Tube by clicking on the logos below.

Anglia delivers by

Recognised as the UK’s number one for reliability, flexibility and customer service.

The new SDC One-piece press fit PCB connector from Phoenix Contact.

Design engineers are under increasing pressure to fit more and more functionality into electronic devices and at the same time make them smaller and simpler to build. An impossible task you would think, but help is now at hand from Phoenix Contact when considering device connectivity with the introduction of the SDC press fit connector range.

Pitch and cable size are often fixed due to electrical requirements but location and assembly considerations have a new innovative solution. The new and innovative SDC 2.5 PCB connector from Phoenix Contact with SKEDD direct plug-in technology brings new choices to design engineers struggling with device connectivity.

With the relentless drive for devices to get smaller and have increased functionality, Phoenix Contact have identified a need for a new style of PCB connector which offers all the benefits of a traditional plug and header combination but without the restrictions placed on it by traditional production methods. The new SDC 2.5 from Phoenix Contact offers such a solution by merging press-fit headers with push-in spring conductor connection technology.

The SDC 2.5 uses SKEDD direct plug-in technology for a reliable contact to the PCB combined with conductor connections with push-in spring connection technology. Designed on a pitch of 5.00mm and with cable cross sections up to 2.5mm/sq the SDC is capable of carrying up to 12 amps and 320 volts making it a versatile solution for many applications. The SKEDD direct plug-in technology is extremely reliable (more so than soldering) and the contacts are qualified for PCB's with HAL (Hot Air Levelling) surface finishes. The SDC is available in 1 through to 16 pole versions and includes integrated test points, optional coding pins and cable release levers.

Click below to see a short video introduction to SKEDD direct plug-in technology by Phoenix Contact

There are several advantages with the SDC with the most obvious being the one piece assembly. No header means one less component to fit during the automated assembly and the SDC can be pre-wired (if needed) ready for final assembly following the soldering process for other components on the PCB. As the connector does not go through the soldering process it can be located more conveniently without worrying about its impact on other components during soldering and visual inspection.

Click here for more information or buy from Anglia Live.

Anglia are offering customers FREE samples of the SDC press fit connectors from Phoenix Contact, please fill in the form to request your FREE samples now.