 |
KEMET release technical paper to assist designers’ selection of capacitors for audio applications
01 December 2008 |
| When designing for an audio application that requires capacitors with low dielectric losses, low acoustic noise and good temperature stability of capacitance, the top two choices are Class I C0G MLCCs and SMD film capacitors. But which do you choose? |
|
|
|
|
 |
KEMET launches military SMPS stacked capacitors
30 March 2008 |
| KEMET has introduced military-grade ceramic stacked capacitors for use in high-frequency power supplies. The product is commonly referred to as Switch Mode Power Supply Stacked Capacitors, or SMPS Stacked Capacitors. |
|
|
|
|
 |
KEMET introduces the first 35 volt rated polymer tantalum capacitor
19 March 2008 |
| Since their introduction in the 1990’s, polymer tantalum capacitors have become a popular choice for capacitance solutions in the portable consumer electronics market due to their low ESR. |
|
|
|
|
 |
KEMET expands numerous capacitor ranges
15 November 2007 |
| KEMET has expanded various series of surface mount tantalum capacitors, as well as their AO-CAPs, in order to meet the latest industry demands for smaller components, additional values and lower ESR ratings. |
|
|
|
|
 |
Surface mount ceramic chip capacitors from KEMET– C0G dielectric
10 July 2007 |
| KEMET Corporation has announced the release of several new MLCC products in C0G dielectric. These new additions to the company’s C0G portfolio boast industry-leading capacitance values, including several first-to-market values. |
|
|
|
|
 |
KEMET announces release of established reliability 50 volt rating capacitors
02 April 2007 |
| KEMET has announced the release of twenty-two established reliability part numbers qualified to MIL-PRF-55365/4 & /11, styles CWR09 and CWR29, for both the T409 and T429 series of surface mount tantalum capacitors. |
|
|
|
|
 |
KEMET introduces “Soft Termination” to reduce MLCC cracking - flexibility helps move flex cracks into safe zone
01 February 2007 |
| Always looking toward the future for capacitance solutions, KEMET Corporation has announced a new MLCC capacitor that utilizes a soft termination to help decrease the chances of board flex cracking. |
|
|
|
|
 |
KEMET offers low profile HiCV MLCCs to help ease design of portable and miniature electronics equipment
09 January 2007 |
| KEMET has addressed the growing need for reduced height components with the expansion of its range of high capacitance, Multi Layer Ceramic Capacitors (MLCCs) to include two new low profile parts. |
|
|
|
|
 |
More industry leading CV and ESR offerings from KEMET in the form of T520C and T530X series
03 November 2006 |
| KEMET a leader in low ESR polymer products, has introduced six new T520C (6032-28) part types in addition to two new T530X (7343-43) values that are now available in industry leading ESR and capacitance/voltage offerings. |
|
|
|
|
 |
KEMET expands ceramic open mode fail safe X7R MLCC portfolio with extended capacitance values
03 October 2006 |
| KEMET Corporation has announced the expansion of its open mode/ fail safe surface mount Multi-Layer Ceramic Capacitor portfolio with the introduction of extended capacitance values in EIA 0805, 1206, and 1210 case sizes. |
|
|
|
|
