1N4003

Features

• The plastic package carries Underwriters Laboratory
• Flammability Classification 94V-0
• Construction utilizes void-free
• molded plastic technique
• Low reverse leakage
• High forward surge current capability
• High temperature soldering guaranteed:
• 250 C/10 seconds, 0.375”(9.5mm) lead length,
• 5 lbs. (2.3kg) tension

Mechanical data

• Case: JEDEC DO-41 molded plastic body
• Terminals: Plated axial leads, solderable per MIL-STD-750,
• Method 2026
• Polarity: Colour band denotes cathode end
• Mounting Position: Any
• Weight: 0.012 ounce, 0.33 grams

Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.

• Maximum repetitive peak reverse voltage: VRRM 200 VOLTS
• Maximum RMS voltage: VRMS 140 VOLTS
• Maximum DC blocking voltage: VDC 200 VOLTS
• Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 75°C: I(AV) 1.0 Amp
• Peak forward surge current 8.3ms single half sine-wave superimposed on rated lead ( JEDEC Method) IFSM 30.0 Amps
• Maximum instantaneous forward voltage at 1.0A: VF 1.1 Volts
• Maximum DC reverse current at rated DC blocking voltage TA=25°C: IR 5.0 µA and TA=100°C: IR 50.0  µA
• Typical junction capacitance (NOTE1): CJ 15.0 pF
• Typical thermal resistance (NOTE2): R0JA 50.0 °C/W
• Operating junction and storage temperature range: TJ,TSTG -65 to +175 °C

Note:
1. Measured at 1MHz and applied reverse voltage of 4.V D.C.
2. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, PCB mounted