Rate this page
Columbus STR7 development tool
The STR71x Evaluation Board is a complete development platform for the STR71xF, 64 pin series. It is a cost effective, flexible & open design enabling the rapid evaluation of the latest ARM7 core microcontrollers from STMicroelectronics.
The board is available in either of two versions depending on which of the TQFP64(10 x 10) packages is onboard, USB (with STR711FR2T6) or CAN (with STR712FR2T6), both with 256KB of onboard Flash memory & 64KB of RAM. The board includes serial Flash on the SPI bus & EEPROM on the I 2 C bus.
It integrates a 2 x 16 LCD, LEDs, UARTs, test buttons, an analogue input and either CAN or USB interfaces to create a versatile stand-alone test platform. A ‘Wiggler’ compatible JTAG interface is built on to the main board that can be removed if required and used as a completely separate board.
To aid rapid development and keep costs to a minimum Anglia have integrated STR7 support within the GCC toolchain which is free and supplied with this board.
- STR71x processor running up to 48MHz
- ARM core with embedded FLASH & RAM
- 2Mb SPI serial FLASH memory on board
- 1Kb I 2 C EEPROM on board
- LCD display
- USB or CAN interface
- Dual UART
- JTAG debugging
- Test buttons
- ADC input
- LED display
- Boot selection
- 5V, 3.3V & 1.8V supplies
- 30/32 I/O ports
- Host parallel cable supplied
- RS232 cable supplied
- USB cable supplied with USB version
- Pack includes mains/9V power supply & Software CD
To order, telephone 01945 47 47 47 quoting the order codes below:
For other enquiries email email@example.com