 |
Avago Technologies announces one of the industry's smallest 3-Watt miniature high brightness LEDs for use in solid-state lighting applications
03 July 2009 |
| Avago Technologies has announced one of the industry’s smallest high-brightness 3-Watt LEDs for use in a wide range of solid-state lighting applications. |
|
|
|
|
 |
Avago Technologies announces one of the industry's smallest high-power LED emitters for use in a wide range of solid-state lighting applications
09 March 2009 |
| With dimensions of 5mm by 4 mm by 1.85 mm thick, Avago's new compact 1-Watt (1W) ASMT-Jx1x is packaged in a small outline package (SOP) and capable of being driven at 350 mA to provide high flux output performance. |
|
|
|
|
 |
Avago introduce 18 to 33 GHz, 0.2W driver amplifier - AMMC-6333
05 March 2009 |
| The AMMC-6333 is a broadband 0.2W MMIC driver amplifier designed for use in transmitters operating in various frequency bands from 18GHz to 33GHz, fabricated using Avago’s unique 0.25µm E-mode PHEMT technology. |
|
|
|
|
 |
Avago Technologies announces new energy efficient 1-Watt high-power LED emitter for solid-state lighting applications
03 March 2009 |
| Avago Technologies has announced a new competitively priced 1-Watt high power LED emitter for use in solid-state lighting applications, housed in an industry recognised circular package. |
|
|
|
|
 |
PCB based subminiature lamps (PCB PolyLED) from Avago
19 February 2009 |
| The ASMT-Bx20 is an environmentally friendly green product of unique PCB based subminiature lamps namely PCB PolyLED. These PolyLEDs come in an un-tinted, non diffused package to cater for various product themes and ease of handling applications. |
|
|
|
|
 |
High Current, 1 Form A, solid state relay (MOSFET) from Avago
05 February 2009 |
| The ASSR-5211 is specifically designed for high current applications, commonly found in industrial equipment. The relay is a solid-state replacement for single-pole, normally-open, (1 Form A) electromechanical relays. |
|
|
|
|
 |
Miniature isolation amplifiers from Avago
22 January 2009 |
| The ACPL-C78A/C780/C784 isolation amplifier family was designed for current sensing in electronic motor drives but can also be used for general analogue signal isolation applications. |
|
|
|
|
 |
Avago introduce 2.5 amp output current IGBT gate driver optocoupler with low ICC & UVLO in stretched SO8
08 January 2009 |
| The ACPL-H312 contains a GaAsP LED, which is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. |
|
|
|
|
 |
Super 0.5W cool white power PLCC-4 surface mount LED indicator from Avago
04 January 2009 |
| The Super 0.5W Cool White Power PLCC-4 SMT LED is first Cool white mid-Power PLCC-4 SMT LEDs using InGaN chip technology. The package can be driven at high current due to its superior package design. |
|
|
|
|
 |
Avago Technologies simplifies GPS designs with first complete GPS RF front end module with FBAR filters
04 January 2009 |
| Avago Technologies, has announced a highly integrated GPS low noise amplifier (LNA) with high performance levels. The ALM-1712 effectively integrates a sophisticated GPS LNA and two FBAR filters. |
|
|
|
|
